Tank Configuration | Panel Type Water Tank | Bridgestone Corporation

Construction Materials | Panel Type Water Tank

Tank Panel

Internally Reinforced With Tie Rods

For Small To Medium Size Tanks

Panel type tanks, over two meters high made from 1 meter square panels.
Stainless steel tie rods provide sufficient strength and stability.

Internally Reinforce Width Diagonal

For Medium To Medium Size Tanks

Panel type tanks three tiers, longer length.
Diagonal struts installed to overcome higher bending stresses and provide stability

Comparision:Bridgestone's Panel Type Tank And Other Tank Types

Comparision:Bridgestone's Panel Type Tank And Other Tank Types

Components Materials

Components Materials

TypicalTank Configuration

Panel Material Characteristics

Panel Material Characteristics

Design Condition

Design Condition

Wind Velocity    60m/sec.
Snow Load        60kgf/m²
Man Load         120kgf
Seismic Load    Horizontal Seismic
                      Coefficient
                      Kh = 0.3
Water Temperature 40°C(Max)
Anchor Bolts shall be used to tie down a tank.
Note:
Panel strength is the acutal
“bursting” pressure.

1.0H

1.5H

2.0H

HALF HH PANEL (For Bottom and Side)

1.5M LH-LN PANEL (For Side and Partition)

2M TH-TN PANEL (For Side and Partition)

STANDARD KF PANEL (For Side)

1.5M LM PANEL (For Side)

2.0M TM PANEL (For Side)

2.5H

3.0H

3.5H

STANDARD KP PANEL (For Piping and Drainage)

STANDARD KL PANEL (For Side)

STANDARD KB & KT PANEL (For Bottom and Roof)

4.0H

HALF HB PANEL (For Bottom)

STANDARD M PANEL (Manhole)

HALF HT PANEL (For Roof)

QUARTER GF PANEL (For All Positions)

Accessories

: This website is built in Flash and requires the latest Flash-plugin and a Java Script enabled browser.
We recommend that you download and install the free Adobe Flash® Player