Industrial Products

Industrial Products | Hydraulic HoseHow to use This Web-Site

HOSE / COUPLING / Adaptor

[HOSE LENGTH(L)]

Please refer to the figures below when you specify the assembly length.

[HOSE LENGTH(L)]

[Orientation Angle]

Orientation Angle

Bent tube ends and flange head couplings can be oriented at different angles to one another and must be specified when ordering. As per the illustration left, the orientation angle is measured starting from either end as the far end, clockwise to the near end angle. In the case of illustration left, the orientation angle is 225°.

Selecting the proper hose

Please check below points.

  1. Fluid to be used.
  2. Delivery (flow rate and velocity) or Hose ID.(Please refer "Pressure Loss'in this web-site)
  3. Maximum working pressure.
  4. Fluid and ambient Temperature.
  5. Thread type.
  6. Hose Length (Please refer[Hose Length(L)]above and "Hose exposed length calculation" in this web-site)
  7. Orientation angle (Please refer above[Orientation Angle])
  8. Application and Environmental Conditions.
  9. Minimum bending Radius.
  10. Drawing.